Stainless steel ferrule connector The installation process of is relatively simple, mainly including the following steps:

Saw off the seamless steel pipe of proper length, remove the burrs at the end, and ensure that the end face of the pipe is perpendicular to the axis, and the angle tolerance is not greater than 0.5 °.

Put the nut and ferrule on the seamless steel pipe in the correct direction.

Apply lubricating oil on the thread and ferrule of the preassembled connector body, insert the pipe into the connector body, and tighten the nut by hand.

Tighten the nut until the ferrule catches the pipe. At this time, the pressure point can be felt by increasing the tightening torque.

After reaching the pressure point, tighten the compression nut for 1/2 turn to complete the installation.

During installation, it is necessary to ensure that the connection place is clean, the pipe orifice is polished and flat, and there is no burr, concave and convex surface. At the same time, when connecting, make sure that there is no bending at the embedded part of the ferrule connector to prevent air leakage.

In a word, stainless steel ferrule connector, as an advanced connector, plays an important role in the pipeline system. Its excellent performance and simple installation process make it the choice for many industries.