1. During transportation and storage, Stainless steel ferrule connector Collision and falling shall be avoided to avoid damaging the interface and internal parts.

2. Install the machine concentrically as far as possible to ensure good operation of the rotary joint.

3. When installing the threaded rotary sleeve joint, pay attention to whether the thread direction of the inner and outer pipes is consistent with the rotation direction of the drum, and the thread direction of the inner and outer pipes should also be consistent.

4. The stainless steel ferrule connector must be connected to the pipe with hose, and rigid connection is absolutely prohibited.

5. The inlet and outlet of stainless steel ferrule connector shall be directly connected to the hose as far as possible. Reduce the auxiliary weight of stainless steel ferrule connector and extend its service life.

6. Attention shall be paid to the matching of size and auxiliary support of weight during the assembly of stainless steel ferrule joint inner pipe. The H8/e7 tolerance fit is recommended for the fit between the inner tube and the inner swivel joint.

7. The support and stop of stainless steel ferrule joint shall be appropriate, and the diameter of the rod shall be 2mm smaller than the stop hole, so as not to affect the free adjustment and compensation of the rotating joint.