上海花千坊网站

Whole site search Instrument needle valve Stainless steel ferrule connector Instrument pipe fitting valve

Current location: home page > News Center

The working principle of stainless steel ferrule joint is to thread the steel pipe into the ferrule

2024-09-26 11:16:19

Stainless steel ferrule joint consists of joint body, ferrule and nut. When the ferrule and nut are inserted into the joint body on the steel pipe and the nut is tightened, the outer side of the front end of the ferrule is matched with the conical surface of the joint body, and the inner edge is evenly engaged in the seamless steel pipe to form a useful seal. Stainless steel ferrule connector has connection

More +
The following is a detailed introduction to the stainless steel ferrule connector

2024-08-21 09:27:59

1、 Features and advantages: The stainless steel ferrule joint tightly connects the steel pipes with ferrules and nuts to form a firm connection structure. High pressure resistance: it can withstand high pressure, and the nominal pressure can reach 25MPa or 40MPa, meeting the requirements of various high-pressure pipeline systems. Temperature resistance: stainless steel material

More +
Instrument pipe fitting valves usually have the following characteristics

2024-07-22 09:14:16

Instrument pipe fitting valve refers to a valve used in the pipeline system, which is usually used to control the flow, pressure, temperature and other parameters of fluid (such as liquid, gas, etc.). These valves are usually used to monitor, measure and control the fluid in the pipeline system to ensure the normal operation of the system and meet specific process requirements. Measurement and

More +
Installation and use of stainless steel ferrule joint

2024-06-20 09:35:14

The installation process of stainless steel ferrule joint is relatively simple, mainly including the following steps: saw off the seamless steel pipe of appropriate length, remove the burrs at the end, ensure that the end face of the pipe is perpendicular to the axis, and the angle tolerance is not more than 0.5 °. Put the nut and ferrule on the seamless steel pipe in the correct direction. In the pre assembly of connector body thread and ferrule

More +
Instrument needle valve is an important part of instrument measurement pipeline system

2024-05-22 09:46:37

The instrument needle valve is an important part of the instrument measurement pipeline system, which is mainly used to open or cut off the pipeline channel. The valve core is a thin cone, inserted into the valve seat like a needle, so it is named. This valve is characterized by the ability to accurately adjust the flow, and its shape can withstand greater than other types of valves

More +
Instrument pipe fitting valve, also called instrument valve

2024-04-23 09:17:19

Instrument pipe fitting valve, also called instrument valve, is a pipeline accessory. Its main function is to change the section of the passage and the flow direction of the medium, so as to control the flow of the conveying medium. The following is the specific function analysis of instrument pipe fitting valves: connect or block the medium in the pipeline: instrument valves such as gate valve, globe valve, ball valve, etc

More +

Each page displays 6, 46 in total home page

one two three four five

1/8

next page Last page

Scan WeChat

Copyright © Jiangsu SOPUTE Fluid Control Co., Ltd. All rights reserved Record No.: Mainly engaged in Instrument needle valve , Stainless steel ferrule connector , Instrument pipe fitting valve Welcome to inquire!
Disclaimer Main business area: Beijing Jiangsu Nanjing Wuxi Changzhou ynz Yangzhou Zhenjiang Danyang Yangzhong

Hot information | Enterprise substation | Site Map | RSS | XML